Drone Mapping and Inspections in Latvia
Two services for clients who need data rather than pictures: measurable site mapping from 299 € and structure inspections with a defect report from 189 €. Both are flown and delivered by the same person across Latvia, and both end in a file your engineers, your contractor or your insurer can actually work from.
An orthophoto and an inspection can come from the same visit when the site allows it, which costs less than two separate call-outs.
Two services, one aircraft
Mapping answers how big, how far and how high. Inspections answer what is wrong and where. Each has its own page with the full price list.
Mapping and 3D models
Orthophoto, elevation surfaces and photogrammetric models for sites, corridors and structures.
- Orthophoto of a site 299 €
- Large or linear site 449 €
- 3D model 299 €
- With DSM and DTM 649 €
Drone inspections
Roofs, facades, chimneys, towers and solar parks, with a PDF report of dated frames and marked defects.
- One element 189 €
- Whole building exterior 299 €
- Full inspection set 499 €
- PDF report in every package
Both from one visit
A measurable map and a documented defect list from a single flight session, when the site and the airspace allow it.
- Fewer call-outs, one travel cost
- Orthophoto and 3D together 399 €
- Photographs added from 180 €
- Say so before the date is set
If a repeat survey is likely, say so now. Flying comparable passes next time is what makes the year-on-year comparison valid rather than approximate.
Measurable data, or a defect report?
Mapping answers how big, how far and how high. An inspection answers what is wrong and where. Both can come from the same visit when the site and the airspace allow it. Orthophoto work starts at 299 €, an inspection with a PDF report at 189 €. Open the page that matches your task, or describe the decision behind it and I will say which one fits.
How a job runs
And what lands on your desk
Both services are only worth paying for if somebody can act on the result. That is why the deliverable, not the flight, decides how the site is flown.
-
01
You describe the decision
What the data or the report has to support: a repair, a tender, a warranty claim, a design, a volume calculation. This changes everything downstream.
-
02
Airspace and site check
I check the geographical zones over the location and coordinate the flight where required, before the date is confirmed.
-
03
The flight is planned, not improvised
For mapping that means altitude, resolution and both overlaps, frontlap along the line and sidelap between lines. For inspections it means systematic passes element by element.
-
04
Processing
Imagery becomes an orthophoto, a model or elevation surfaces. Inspection frames are dated, organised by element and the defects marked.
-
05
Delivery
Georeferenced files in the agreed formats, or a PDF report, usually within a few working days.
-
06
Questions afterwards
If the result raises a question, I answer it rather than referring you back to the file.
Honest limit: aerial mapping is not a substitute for a licensed surveyor where the law or a client requires one. I will say so plainly rather than let you find out later.
Prices
Everything from both services in one table. Prices apply in the Riga area, and for sites further away travel is included in the quoted price.
Mapping
Required resolution, the area and the shape of the site are what move the price, not the file format.
Inspections
Every package includes the report with dated frames organised by element and the defects marked.
Combined and repeat work
A portfolio surveyed on a cycle costs less per site, and the comparison between years becomes the real product.
What you receive
Delivery usually within a few working days, in the formats agreed before the flight rather than after it.
Data somebody can act on, not a folder of images
Plenty of operators will fly your site and send you files. Somebody on your side then has to work out what the resolution is, which frame shows what, and when it was taken. Here the deliverable is agreed before the flight: the resolution the task needs, the formats your software reads, and a report written for the technician, the contractor or the insurer who will open it.
- Deliverables and formats agreed before the flight
- Both overlaps planned for mapping, frontlap and sidelap
- Inspection report with dated frames and marked defects
- Comparable repeat surveys for year-on-year work
- Honest limits stated, including when a surveyor is needed
What you receive
Agreed before the flight, because afterwards is too late to change the resolution.
- Georeferenced orthophoto. A measurable aerial map of the site rather than a pretty picture.
- 3D model. In the formats your software reads, for presentation or for measuring a repair.
- DSM and DTM. Elevation surfaces on request, where the task needs height rather than plan.
- Inspection report. Dated frames organised by element with defects marked, in every inspection package.
- Full usage rights. Pass the files to your engineers, your contractor or your board without asking me.
What these do not replace is a licensed surveyor's certified measurement or a structural engineer's assessment.
What you arrange
-
Before the quote
The decision the data supports
A repair, a tender, a design, a claim or a volume calculation. The answer decides the resolution and the format.
-
Access
Permission to be on the site
I handle the airspace side. You arrange access and warn residents, staff or tenants that a drone will be flying.
-
For comparisons
Previous surveys if you have them
If an earlier orthophoto or report exists, send it. Comparable passes make the new one far more useful.
-
For precision work
Ground control, if required
Where the accuracy requirement is strict, ground control points or a surveyor's input may be needed. I will say so before quoting.
These prices are indicative
I assess every situation individually, because the area and shape of the site, the required resolution, the number of elements, the deliverable formats and the airspace coordination all change the work involved. You therefore receive a fixed price for your agreed scope in the quote, before anything is booked.
The figures on this page apply in the Riga area, and for sites further away travel is included in the quoted price rather than added afterwards. Several sites in one day, a portfolio on a survey cycle and urgent work are quoted in writing.
Tell me what the result has to support
Send me the site, the deliverable you need and the decision behind it. I check the airspace, tell you which service fits and send a fixed price. The assessment is free, and if a simple orthophoto or a single element inspection answers your question I will say so.
Request a quote
Fill in the form and I will answer personally, usually within one working day, with the airspace checked and a fixed price for your scope.
Drone mapping and inspections: frequently asked questions
Answers about prices, accuracy, deliverables, reports, repeat surveys and what you arrange yourself. If your question is not here, call +371 20387400 or write to info@dronueksperts.lv.
01How much does drone mapping cost in Latvia?
An orthophoto of a site costs 299 €, a large or linear site 449 €, a 3D model 299 €, both together 399 €, and an orthophoto with DSM and DTM surfaces 649 €.
03Is the inspection report really included?
Yes, in every package. Without it you have photographs rather than an inspection, and somebody on your side would have to work out which frame shows what.
05What is an orthophoto?
A measurable aerial map of your site, corrected so that distances and areas can be read from it rather than estimated.
07When do we receive the data or the report?
Usually within a few working days, and the quote states the exact date. Urgent work can be quoted separately.
09Can a drone replace a licensed surveyor?
No, not where the law or your client requires certified measurement. For planning, progress and volume work it is usually enough, and I will tell you which case you are in.
11Do you use ground control points?
Where the accuracy requirement calls for it, yes. For many tasks it is unnecessary, and adding it by default would only raise your invoice.
13Can a drone replace scaffolding for an inspection?
For the assessment stage, usually yes. You then pay for access equipment only once you know what needs repairing and where.
15Can the report be used for an insurance claim?
Dated frames and marked defects are what insurers typically ask for. Whether a claim succeeds is their decision.
17Do you use a thermal camera?
Tell me what you need to find and I will tell you whether thermal adds anything to your case, rather than adding it to the invoice by default.
19Is a repeat survey cheaper?
Yes. The site is already known and the passes are already planned, which also makes the comparison between surveys valid.
21Can you survey several sites in one day?
Yes, and it is cheaper per site than separate call-outs. Send me the addresses and I will quote the day in writing.
23What if the site is in a restricted zone?
I find that out before quoting rather than on the day. In dense areas this step decides whether the work can happen at all.
25What happens if the weather is bad?
The flight moves to another date. Wind and rain degrade both safety and data quality, and poor data is worth nothing.
27Can you send us the boundary file format you need?
Yes. A site boundary from you, in whatever format you have, makes the quote faster and the flight plan tighter.
29Do you invoice a company?
Yes, with a contract if needed. I work with companies, public authorities, building managers and owners' associations.
31Are you insured?
Third party liability cover is mandatory for drone operations in Latvia, and I fly with my own registration, competence and insurance.
02How much does a drone inspection cost?
A visual inspection of one element costs 189 €, a complex object or two elements 249 €, a whole building exterior 299 €, and a full set 499 €.
04What is in the inspection report?
A PDF with dated frames organised by element and the defects marked, written so a technician, a contractor or an insurer can use it without further explanation.
06Can we get both mapping and an inspection from one visit?
Often yes, if the site and the airspace allow it. Say so in advance, because the flight has to be planned for both.
08What formats do we receive?
The formats agreed before the flight, chosen so your software opens them. Tell me which programs your team uses.
10How accurate is the result?
It depends on the flight altitude, the resolution and whether ground control is used. Tell me the accuracy you need and you will get a straight answer before ordering.
12Can you calculate volumes?
Elevation surfaces allow volume work, which is why stockpiles and earthworks usually need the DSM and DTM package at 649 € rather than a plain orthophoto.
14Do you diagnose the cause of a defect?
I document what is visible and mark it. A structural cause belongs to a specialist, and where one is needed I say so plainly in the report.
16Do you inspect solar parks?
Yes, solar parks and rooftop arrays, where physical damage is often invisible from the ground.
18Can you inspect chimneys and towers?
Yes. Those are exactly the structures where access equipment is slow, expensive or dangerous to place.
20Can you set up an annual survey programme?
Yes, under a contract. For a portfolio of sites a cycle costs less per site and the year-on-year comparison becomes the real product.
22Who arranges permission to fly?
I do. The geographical zones over the site are checked and the flight coordinated where required, before the date is confirmed.
24Do we need to warn residents or staff?
Yes, that side is yours. Telling people in advance prevents complaints and interruptions while the drone is in the air.
26How large an area can you cover?
Large and linear sites are quoted at 449 € and upward depending on the area and the required resolution. Send me the boundary and I will tell you.
28Can we get marketing photographs from the same visit?
Yes, from 180 €, if you say so in advance. The flight plan can usually serve both purposes when planned rather than improvised.
30Can everything be in English?
Yes: correspondence, the quote, the report, the contract and the invoice.
32Will you tell us if we need less than we asked for?
Yes, and it happens regularly. If a plain orthophoto or one element inspection answers your question, there is no reason to buy more.
